YOSHINO GYPSUM | Products | Wall materials (plasters)） | Finishing materials (water absorbing primer compound type)

Finishing materials (water absorbing primer compound type)

Wall coating material using all natural material such as gypsum, diatomite, water absorbing primer etc.

Packaging:
8kg kraft paper bag


		Patented (Patent no.4169675)

JIS A6904 Gypsum plaster ＜Noncombustible: NM-2049＞

Can be used for interior finishing in all kinds of room, from houses to stores and commercial facilities.

・	Health-oriented finish material made from natural materials, gypsum and diatomite.
・	Premixed with natural water absorbing primer.
・	Because it is a reactive curing type, it hardens quickly and it is excellent in workability.
・	It has moisture control ability to adjust humidity, and it also has the ability to preventing condensation
・	It has the ability to absorb, decompose and reduce formaldehyde, which is the cause of “Sick Building Syndrome”.

It has 3 basic colors, and you can choose 26 kinds of colors by mixing a basic color (white) with pigments specifically made for Kencoat on site.

Left: Case (4 bags inside)
Right: Bag (150g pack inside)

■About pigments specifically made for Kencoat

○ In consideration of the ecology, Kencoat Pigments comes in 150g “bags”.
○ There are 6 colors of pigment: light pastel cream, brown, green, pink, blue and gray. By combining two kinds of these pigments, you can choose all 26 color variations.
○ It does not contain hazardous substances that can cause "Sick Building Syndrome".

	●Stucco Make it somewhat smooth. Press trowel vertically, then pull slightly ahead and make a wave. When the surface starts to close, press the wave head with the trowel or roller containing water to make a head cut finish.Make it somewhat smooth. Press trowel vertically, then pull slightly ahead and make a wave. When the surface starts to close, press the wave head with the trowel or roller containing water to make a head cut finish.
	●Brushed After applying coating with 3~5mm thickness, erase the big trowel wave and make it smooth to some extent. While paying attention to the firmness, create a brushed pattern.
	●Trowel coat-and-release Apply coating with 3~5 mm thickness, lightly smooth it, then immediately follow the waves, and keep the marks (waves) without erasing the pattern.
	●Trowel drag After applying coating with 3~5mm thickness, make it smooth to some extent. Slightly lift the wide end of the trowel, and create the pattern by only using the sharp end.
	●Spanish Apply coating with 3~5mm thickness, and make it smooth to some extent. Drag the sharp end of the trowel immediately while pressing it vertically, horizontally and diagonally.

＜Example of Construction in New Construction＞

Click here to return to the top of the page▲